- Empty cart.
- Continue Shopping
Marine Pneumatic Fender Floating Type Boat Fender for Dock Defence
Features of Marine Pneumatic Fender
- Shape Conformant at Inclined Compression
- Relatively Low Economic Cost
- Lower Reaction Force with Excess Load
- Advantage Under Severe Weather Conditions
- Strong Enough against Shear Force
- Tide Adaptation
- Easy to Install or Replace
- Lower Maintenance Expenses
- Low Transportation Cost
- No Variation or Deformation in Performance
- Safe and Reliable
Marine Pneumatic Fender Application
- Ship-to-Ship Transfer Operations
- Ship-to-Ship Services
- Offshore Platform Defense
- Ship Berthing at The Dock
- Hang on The Ship Hull
| Pneumatic 50 fender size and performance requirements | ||||
|---|---|---|---|---|
| Nominal size diameter x length mm |
Initial internal pressure Kpa |
Guaranteed energy absorption (GEA) | Reaction force at GEA deflection (R) | Hull pressure (Internal pressure) at GEA deflection (P) |
| Minimum value at deflection 60 ± 5 % KJ | Tolerance ±10 % KN | Reference value KPa | ||
| 500 x 1000 | 50 | 6 | 64 | 132 |
| 600 x 1000 | 50 | 8 | 74 | 126 |
| 700 x 1500 | 50 | 17 | 137 | 135 |
| 1000 x 1500 | 50 | 32 | 182 | 122 |
| 1000 x 2000 | 50 | 45 | 257 | 132 |
| 1200 x 2000 | 50 | 63 | 297 | 126 |
| 1350 x 2500 | 50 | 102 | 427 | 130 |
| 1500 x 3000 | 50 | 153 | 579 | 132 |
| 1700 x 3000 | 50 | 191 | 639 | 128 |
| 2000 x 3500 | 50 | 308 | 875 | 128 |
| 2500 x 4000 | 50 | 663 | 1381 | 137 |
| 2500 x 5500 | 50 | 943 | 2019 | 148 |
| 3300 x 4500 | 50 | 1175 | 1884 | 130 |
| 3300 x 6500 | 50 | 1814 | 3015 | 146 |
| 3300 x 10600 | 50 | 3067 | 5257 | 158 |
| 4500 x 9000 | 50 | 4752 | 5747 | 146 |
| 4500 x 12000 | 50 | 6473 | 7984 | 154 |
Marine Pneumatic Fender
Marine pneumatic fender, also called Yokohama fender, has been used in port, harbor, and maritime operations for decades since it was developed in 1958.
Marine pneumatic fenders are divided into three types, including sling type, hydro-pneumatic type, and chain and tire net type. Each type plays a critical role in protecting the safety of marine operations.
Marine pneumatic fender is strictly produced according to ISO17357-1:2014 standard and PIANC guideline in Jerryborg Marine. Any reduction of the guaranteed energy absorption (GEA) is not accepted. What’s more, all marine pneumatic fenders made by Jerryborg Marine enjoy 36 months warranty.
WhatsApp us
Reviews
There are no reviews yet.